What You Must Know About the Paper Bag Forming Mold of the Paper Bag Making Machine from KETE GROUP

1.   KTPM-B330 Paper Bag Making Machine

2.   KTPM-B450 Paper Bag Making Machine

3.   KTPM-B450B Paper Bag Making Machine

4.   KTPM-B450A Paper Bag Making Machine

5.   Points to Note About Paper Bag Making Machine

What You Must Know About the Paper Bag Forming Mold of the Paper Bag Making Machine from KETE GROUP

As we all know, the paper tube forming unit is the most important step in the paper bag making process. For different face widths and bottom widths of paper bags, you need to choose forming Molds of different specifications. So today I’m writing this article on how to replace a build plate.

1.    KTPM-B330 Paper Bag Making Machine

KTPM-B330 paper bag making machine can make paper bags with a surface width of 120-330mm. If you want to make all the specifications of paper bags in this range, then you need to purchase 11 sets of forming Molds. Because according to the regulations of KETE GROUP, in the range of 120-200mm face width, you need to replace an adjustable forming plate every 10mm. Our adjustable forming plate does not mean that all ranges within 120-330mm can be adjusted, but it can only adjust the surface width within 10mm. And in the range of 200-330mm, there are three fixed Molds to choose from. They are the forming Mold with the specification and model number 92, which can make paper bags with a surface width range of 200-220mm and a bottom width range of 60-140mm; the forming Mold with a specification model number 105 can be used to make paper bags with a surface width range of 220-270mm. , The paper bag with the bottom width range of 60-160mm; the specification model is 125 forming Mold, it can make the paper bag with a surface width range of 270-330mm and the bottom width range of 60-180mm.

2.    KTPM-B450 Paper Bag Making Machine

The paper bag made by KTPM-B450 paper bag making machine has a surface width of 220-450mm. Within this surface width, we provide three sets of forming Molds for you to choose from. They are the specification model of the forming Mold is 105. The square bottom paper bag with the surface width of the paper bag ranging from 220-270mm and the bottom width of the paper bag ranging from 90-160mm; the model of the forming Mold is 125, which can make the square bottom paper bag surface width ranging from 270-330mm and the bottom width of the paper bag ranging from 90-180mm. The model of the forming Mold is 145, which can make square bottom paper bags with a surface width of 300-450mm and a bottom width of 90-180mm. When you want to produce paper bags of different specifications, you can replace the forming plate according to the data provided by us.

3.    KTPM-B450B Paper Bag Making Machine

The width of the paper bags made by the KTPM-B450B paper bag making machine is 220-450mm. Within this width, we provide three sets of forming Molds for you to choose from. They are the specification model of the forming Mold is 105. The square bottom paper bag with the paper bag surface width range of 220-270mm and the square bottom paper bag bottom width range of 80-140mm; the model of the forming Mold is 125, which can make the paper bag surface width range of 270-330mm and the paper bag bottom width range of 80-180mm. The model of the forming Mold is 145. It can make square bottom paper bags with a surface width of 300-450mm and a bottom width of 80-220mm. When you want to produce paper bags of different specifications, you can replace the forming plate according to the data provided by us. The difference between the KTPM-B450B paper bag making machine and the KTPM-B450 paper bag making machine is that the bottom width of the paper bags produced is different, and the bottom width of the paper bags made by the KTPM-B450B paper bag making machine is wider.

4.    KTPM-B450A Paper Bag Making Machine

KTPM-B450A paper bag making machine can make paper bags with a surface width of 220-450mm. Within this surface width, we provide three sets of forming Molds for you to choose from. They are the specification model of the forming Mold is 105. Square bottom paper bags with a paper bag surface width of 220-270mm and a paper bag bottom width of 80-130mm; the model of the forming Mold is 125, which can produce square bottom paper bags with a surface width of 270-330mm and a paper bag bottom width of 80-170mm. The model of the forming Mold is 145, which can make square bottom paper bags with a surface width of 300-450mm and a bottom width of 80-200mm. When you want to produce paper bags of different specifications, you can replace the forming plate according to the data provided by us.

The difference between the KTPM-B450A paper bag making machine and the KTPM-B450 paper bag making machine is that the bottom width of the produced paper bags is different. In addition, the KTPM-B190 paper bag making machine is not equipped with an adjustable forming plate because of the small width of the paper bag it produces. When you produce paper bags of different specifications, you do not need to replace the forming plate. The same is true for the paper bag making machines of the pointed bottom series.

The forming plate of the paper tube forming unit of KETE GROUP’s paper bag making machine is made of square steel. For the KTPM-B330 paper bag making machine, an extra connecting plate should be added to the forming Mold of the paper bag with a surface width of less than 200mm. And the forming plates of this machine are all equipped with a pair of 45mm and 80mm square steel. Square steel is a solid bar, the square tube is a hollow tube, and they are different. Steel is an ingot, billet, or steel that is press-worked into the desired shapes, sizes, and properties.

Steel is an essential and important material for national construction and the realization of the four modernizations. It is widely used and has a wide variety. According to the different cross-sectional shapes, steel is generally divided into four categories: profiles, plates, pipes, and metal products. To facilitate the organization of steel production, order supply and do a good job in operation and management, and it is divided into heavy rail, light rail, large section steel, medium section steel, small section steel and other varieties.

For KTPM-B450 paper bag making machine, all the forming plates of this machine are equipped with a pair of 45mm and 80mm square steel. For KTPM-B450B paper bag making machine and KTPM-B450A paper bag making machine, all forming Molds are equipped with a pair of fixed square steel. Folding the paper into a paper tube is a very important step in the process of making paper bags. The most important role in this process is the forming plate of the paper bag making machine.

According to the size of the paper bag, the forming plate of different specifications needs to be replaced, so the adjustment of the forming plate is very important. You can choose the forming Mold by referring to the Mold replacement standard for the forming Mold I mentioned above.

5.    Points to Note About Paper Bag Making Machine

Before starting the paper bag making machine, it should be checked whether the power supply is consistent with the rated voltage of the motor. For the sake of safety, it is necessary to use a grounded three-core power cord with a grounding wire, and regularly check whether the contact and insulation of the wires inside the machine are in good condition.

When using in wet places, you must wear rubber shoes and insulating gloves. When cleaning or using the paper bag making machine, do not allow oil to flow into the electrical parts. When the brushes and cable jackets on the motor are worn, they should be replaced immediately. One machine of paper bag machine can debug paper bags of multiple specifications and sizes.

One machine is multi-purpose and multi-functional but pays attention to the maintenance of the paper bag machine during the use process. The maintenance rule of the paper bag machine is that all components must be refueled every 2 hours within half a month after purchasing the paper bag machine, and all components can be refueled every 4 hours after half a month. And every day after getting off work it is necessary to ensure that all the dust on the rollers on the machine is cleaned up. So that the running process of the paper bag machine is smooth.

The chain of the paper bag making machine should be tightened once every 15 days. All gear top wires of the paper bag making machine are tightened once every 3 days to prevent loosening. All pressure plate fastening screws of the machine should be tightened once every 6 days to prevent loosening.